It is hard to imagine a modern house without washingcar, she firmly established in our everyday life, along with other essential electronic assistants. Washing machine - a complex mechanism, and as it is not sad, can break. How to protect yourself from the trouble and what to do if the machine is still having trouble?
The first step to ensure normal conditions forWork your washing machine is its correct installation: on a hard, flat on a level surface. Do not forget to unscrew the shipping bolts!
More often than others, according to the masters of the service centers to suffer the pump to drain the water, the drum drive belt and a heating element (heater).
The drain pump for a long time in the water,being exposed to the ravages of her. That he served longer - do not forget to pour out of the car all the water. This is especially necessary in the case of long machine downtime. Often the cause of failure of the drainage pump are foreign objects trapped in the car with dirty clothes. Therefore, check the pockets before washing clothes, unbuckle badges and brooches, and lingerie »underwire» and other garments with hard parts wash in special bags. To cope with such a malfunction only by the master of the service center. If the blockage occurred due settled on a lattice filter thread, hair and other small debris, it is sufficient to clean the filter and the pump will start to work again. clogging problem will help solve the pump with anti-lock: drain pump will go into reverse mode and eject hit him subject - such a possibility should not forget when choosing a new washing machine.
Broken drive belt drum usually occursas a result of improper use. If you load the laundry more than admit instruction, during the spin cycle because of uneven distribution of the laundry in the drum is there a strong vibration, which can lead to breakage of the drive belt. The cause of the vibration can be enhanced not only overload the drum, but the incorrect installation of the washing machine and its design features. Before operating the machine must be installed on a firm, level surface level. When choosing the washing machine must be remembered that anti-vibration cast iron pan is better than concrete; models exist that direct drive without driving belt; that there is a model with a frame structure mounting the tank, which completely eliminated the vibration body.
If one day you find that your laundress does notIt warms the water, it means only one thing: the heating element (TEN) has failed. The reason for the breakdown is usually the quality of tap water: hard water leaves an insoluble residue on the surface of the TEN. The heat removal from the heating element deteriorates, the time for heating the water and the electricity consumption increase, the heater is overheated and is out of order. ? In this case, the repair of the washing machine is carried out at a service center (details on http://tservice.kiev.ua/remont-stiralnykh-mashin). However, all the known preventive measures to avoid the formation of scale on the heating element: constant use of reducing water hardness (eg, COLGON) and special funds used for automatic washing. Another enemy of the heating element - lint and thread from washing certain types of fabrics, Reeling in the TEN, and cause it to overheat and malfunction. So do not forget about the special bags for washing.
Victim hard tap water or water withrust and sand particles often becomes a solenoid valve, which is responsible for the Gulf waters. To prevent rust, sand and dirt into the tank, the master repair washing machines recommend to the water supply pipe to the washing machine put the mechanical cleaning filter with replaceable cartridges.
The weak link of washing machines with frontloading door is. Over time, she can wear seal. Premature wear contributes to the rough handling of the machine. So try to accurately load and unload things with hard, especially metallic details (zippers, and so on. N.). After washing, leave the door open for a short time to dry out the inside of the tank surface and seals.
For problems that may lead to serious consequencesIt refers leaking tank. Loss of water resistance may one day lead to the flooding of the apartment and the door of the washing machine out of order. Therefore, with the advent of leaks (water accumulates under the machine) is better not to postpone the visit to the service center. When choosing a washing machine it is necessary to remember that the tanks are made of different materials: stainless steel, plastic and composite materials. They differ in the strength, the price and the level of noise generated. The choice is yours!
It may be a problem in the form of a continuous supply of watertank. The reason for this state machine may be incorrect position of the end of the drain hose: the hose from the low lying water continuously flows out of the car, causing the flow of water into the tank.
Electronic control parts susceptible topower quality. They harm the voltage drops, so the washing machine power is better to connect through a voltage regulator. Break electronics, in particular the timer, it is easy enough during operation to twist the handle of the timer.
Much more rarely, fortunately, it breaks down the engine. The reason for his failure may be a problem with the power supply or water from entering the motor housing. To reduce the risk of contact with water of the engine, the washing machine is better positioned in the kitchen, but not in the bathroom.
