The most desired attribute of the carnival - a mask. With a little effort and creativity it is not difficult to make an exclusive masterpiece in the form of a carnival mask.
There are simple and affordable wayscreate a creative mask for the party. To work need some tools and materials. For single use only the best to buy cheap tools or use the materials at hand.
As a basis we take the most simple and affordablemask blank. Materials: polyurethane resin, silicone adhesive, super glue, fabric (satin, satin, silk, etc.), lace, acrylic paint, a little sandpaper.
There are different ways to create a mask blanks himself.
Method number 1
Cheap masks purchased at the store, whichwill be used as the basis, require a slight correction. The holes for the eyes and the nose is not big enough, so armed with a pair of scissors, cut out new, more suitable holes.
To achieve the required density of the maskWe are using a polyurethane resin. A thin layer of resin applied on the mask and allow to dry for 10 minutes. Then repeat the process, causing the next layer of resin and fabric overlay layer so that it stuck to the base. Let dry preform for a few hours.
After complete drying of the crop of the extra tissue and treat the sharp edges of the blank with sandpaper.
Method number 2
For this option, you need: a strip of gauze or plaster material, petroleum, paper towel.
Setting the mask in this way is to make a cast of the face, the future owner of the carnival mask.
Apply on face thick layer of petroleum jelly, soak a paper towel and carefully spread over the surface of the face, not missing a beat.
Then soak the strips in warm water gypsummaterial, removing excess moisture, go to the application on the face. After applying the third layer must wait for the solidification of twenty minutes. With extreme caution, remove the mold from the face.
If after drying formed weaknesses need to strengthen the procurement another layer of plaster.
Method number 3
To create a preform by this method needplasticine, PVA glue and newspapers. Form for vyleplivaem masks out of clay, and then paste pieces of paper soaked in glue several layers. After drying for one hour, put a few extra layers of paper and then dried. At the end of the workpiece pasted two layers of thick white paper.
After drying to separate the workpiece from the clay mold.
The thicker the applied layer of paper, the stronger the preform. Very dense workpiece can then be processed using grinding materials and lacquered.
decorating masks
Go to the decoration of the mask. At this point, connect the imagination and create a unique image.
? Consider the decoration process using the Harlequin mask as an example.
On the surface of the mask apply a diamond pattern. Cut pieces of tissue fragments in the form of rhombi and using super glue to fix.
Paint it Black acrylic paint moreLozenges. For processing edge mask and holes for the eyes using silicone adhesive, causing him extreme caution on the edge. Then paint the frozen silicone layer of golden or silver paint. In addition, the diamonds can be decorated with beads, attaching it with the super glue.
Mask at its discretion decorate with lace, feathers, glitter, sequins, etc.
So we did an excellent mask, and now it's time to think of what to give their beloved heart during the carnival. To this end, I strongly advise you to online perfume store in Belarus or in any other city, and buy it from the eminent spirits brand. </p>
